How BIM Modeling Companies Measure BIM for Project Management?

How BIM Modeling Companies Measure BIM for Project Management

 

Being from digitized technique of construction, BIM modeling companies have become the necessity of the hour. Earlier treated as an expensive software in comparison to the traditional construction techniques. Nowadays people or companies are either looking to outsource BIM services or hiring consulting companies. The whirlwind of BIM benefits is taking architecture, construction and engineering industry in its grip. Resulting in the universal implementation, value-additions and overall modifications in design build services work environment. 

In fact the truth is your project management ROI will also improve by adopting appropriate BIM services. There are few simple tricks to master how  to measure BIM. But before that, just a brief dig on what is BIM?

What does BIM mean? 

Building Information Modeling is a digitized environment with visualization capabilities. The information model created facilitates design collaboration amongst designers, architects, contractors and engineers. The prominent benefit of BIM design collaboration is clash coordination at the early stages through 3D BIM models. 

As a contractor while building designs, if clashes are resolved at the initial stages, cost overrun can be controlled. This will also make MEP services cost-effective, improving your project management ROI.

But yes before implementing bim let’s take a look on benefits of BIM for project  

Benefits of BIM Modeling Companies for project management:

BIM Modeling Companies in New York

•   BIM design collaboration has an extensive information model for designing, constructing and executing.

•    The systematic and online scheduling in real time environment enables handling of a wide array of challenges. BIM services handle leisure travel deals and support risk mitigation with its design collaboration approach. 

•      BIM performance assessment helps in setting metrics and benchmarks.

•      AEC BIM services assist design build professionals to develop roadmaps for BIM strategies, identifying the actual goals with precise estimations and quantity take-off.

Best BIM companies in USA meet collaboration challenges of designers, architects, contractors and engineers during construction project lifecycle. So lets learn to measure BIM.

Why Measure BIM?

The purpose of BIM measure maturity is to ensure creation of an information model adhering all construction requirements. A well integrated map of BIM model with design collaboration acts as a decision making tool during construction, planning, execution phases. Selecting what to measure while assessing BIM Building Information Modeling is most challenging in BIM maturity research. BIM Service Providers in US and best BIM Companies across world should choose apt BIM elements to evaluate effectively on map of BIM adoption. 

How to measure BIM?

BIM map maturity measure (BIM-MM) divides the process under two sections. The core section is the team of design and construction companies who are executors of building designs. The outer section constitutes of client’s requirement. Balanced collaboration is the Best Luxury Travel Advisors of inner and outer core forms the driving force of BIM execution plans.

Depending on client’s requirement BIM techniques are chosen for execution from 3D BIM to 4D Scheduling or 5D cost estimation. After deep analysis of BIM process it is evident that what is targeted as a milestone in strategy planning is only executed and achieved. So, defining goals correctly, understanding of client’s perspectives and strategy planning with design collaboration will only take you to the expected results.

So, parameters to consider for selecting appropriate BIM elements on the map of BIM implementation are:

  1. BIM LOD level of detail of the model that needs to be adopted.
  2. Precisely described goals and perspectives.
  3. Adoption of required BIM tools and techniques.
  4. Sharing of data amongst the stakeholders
  5. Understanding and design collaboration of BIM model.

BIM Support to Structural Engineering, Architectural Engineering & MEP Services 

The fact is construction management structure stands on pillars of structural engineering, architectural engineering and MEP services. BIM capability to support the structures makes design build environment more strong. Statistics reflect BIM companies in NewYork phase-wise BIM adoption has added value for architectural engineering, structural engineering and MEP services.

bim companies in new york

Final Word:

The bottom line is with BIM software applications like Autodesk Naviswork, Dynamo, Tekla benefits on table, project management responsibilities are streamlined. 3d model manages consistency in scheduling, quantity takeoff , cost estimation with any design change. You can definitely cut down cost and time overrun with automatic and consistent change management.

So, no longer you should wonder how BIM modeling companies are growing leaps and bound. Top BIM companies in New York, USA are adopting these measures for successful construction project management. If you want to leverage BIM in your construction workflow, consult Tejjy Inc. – one of the top BIM Modeling Companies in New York, US proficiently working with various BIM stages throughout the construction project lifecycle.

Point Cloud to BIM Facilitates Detailed Scan for Industrial Renovation

BIM Companies in the USA are implementingPoint Cloud Laser Scanning to BIM for industrial project renovation. Many of the boiler and chiller plants are using a detailed scan for renovation work. The BIM Service Providers in the USA often work with the RCS & RCP scans ­for creatingthe3D model of Architectural, Structural, Mechanical, and Plumbing trades.

What are the Advantages of Using Laser Scan?

The Building Information Modeling Company in the USA captures comprehensive information about a component in physical space and allows accurate modeling and coordination. The 3D BIM scanning procedure facilitates varied phases of construction like 3D model creation, 3D visualization as well as Quality Inspection.

What are the Bene­fits of Point Cloud BIM Services?

  • Precise 3D modeling of individual trades for renovation from laser scanning data, allowing stead fastness & quality assurance
  • At the time of renovation, construction scan to Building Information Model provides an improved platform for creating added detail of design for an extension
  • As-Built Drawings from BIM Point Cloud help in creating Planning, Elevation & Section Sheet for Architectural, Structural and MEP trades
  • Enhanced transparency & streamlined communication with 3D BIM visualization facilitate quick decision making at the time of renovation & extension
  • Elimination of RFI’s, work stoppage and rework by checking the accurateness& completeness of 3D Model from laser scanning data

Application of Point Cloud Services:

Point Cloud to BIM Service is often required by the general contractors in the USA for creating various models of Architectural, Structural & MEP elements such as the exterior & interior walls, windows, doors, ceiling, floor, roof, structural column, beam, slab, bracing, trusses, floor, duct, pipes, and other equipment.

What are the Deliverables from Point Cloud to BIM Services?

  1. 3D BIM Modeling at LOD 300 & 400for Architectural, Structural &MEP (Mechanical, Electrical & Plumbing) trades based on the Data of the Cloud Scan used for Renovation.

BIM Service providers in the USA create the 3D Models using BIM, based on point cloud scan data for enhancing transparency &streamlining communication for quick decision making during the As-Built Phase.

  • Quality Revit BIM models ensure that the Revit components are created intelligently with the practicality to serve the purpose
  • The parametric families encompass real-world information or performance models, essential for running calculation analysis as well as simulations

Instances of Industrial Plant 3D Modeling for Laser Scan to BIM:

  • Architecture – 3D BIM Model of Door, Window& Wall
  • Structure – 3D Modeling of Beam, Column, Slab, Equipment Pad & Wall
  • Plumbing – 3D Model of Pipes, Valve &Fittings
  • Mechanical – BIM Modeling of Pipe, Duct, Valves, Accessories &Equipment
  • As-Built Drawing Creation from Point Cloud for Planning, Elevation & Section Sheet of Architectural, Structural & MEP Services
  • As-Built Drawing Preparation from the BIM Model serves as a complete reference tool for enabling future project planning including extension, renovation as well as redevelopment from point cloud data
  • As all specifications about the building erection, dimension, fabrication, elevation, materials, and location can be acquired from the As-Built Drawings; they can be used by the clients for resolving disagreements about insurance claims.

Point Cloud to BIM Work Process in Revit Software Platform:

  1. Input Prerequisite for 3D BIM Modeling & Drawings
  • Scan data(RCS) supporting Revit Software application
  • real photos of an existing site condition
  • As-Built Drawings of some areas
  • Raising RFIs for Resolving Issues in Various Trades
  • Areas concealed by equipment or elements
  • Difficulty in gauging the diameter of insulated duct or pipes
  • The discrepancy between the point cloud and as-built drawing
  • Supporting Point CloudSoftware Usage

Supporting Software Applications for Point Cloud facilitates visualizing and accurately navigating the point cloud. Further, by using these software platforms, dimensions can be easily obtained for the BIM model.

  • Work Process Followed by the BIM Companies in the USA:
  • Insertion of Point Cloud Data (RCS) in Revit Software Platform
  • Trade wise Model Creation in Revit
  • Forming a Set of Clarification for a Concealed Space
  • Making an Assumption Logbook for Clarification
  • Quality Checking for Missing Components & Abnormalities amongst Scan & Model
  • Submission of the Complete Model for the Sake of Review & Feedback
  • Quality Checking
  • Following Standard checklist for Quality Analysis/Quality Checking
  • Preparing Section views in Revit for Checking deviations
  • Formulating Standard Checklist for QA/QC
  • Creating Section views in Revit for checking deviations

What is the Specialty of Using Laser Scan to BIM?

Laser Scanning to BIM conversation plays a significant part in an existing building renovation. The BIM Modelers develop all elements in 3D as per the individual scan data for modeling of all trades.

Software Used in Point Cloud Laser Scan to BIM:

  • Autodesk Revit
  • NavisWorks
  • Autodesk Recap 360

Value Addition through Point Cloud to BIM Services

  • Reviewing interdisciplinary coordination based on Scanned data
  • Creation of an accurate 3d BIM model of individual trades for renovation and extension work from scan data, enabling reliability & quality assurance
  • Enhanced transparency & streamlined communication with BIM 3D visualization for quick decision making during renovation & extension phases.

Want to implement Laser Scan Point Cloud to BIM services for your industrial plant in the USA? Get in touch with Tejjy Inc. at 202-465-4830 or [email protected] The Women Minority Certified Construction Company in Washington DC provides comprehensive BIM (Building Information Modeling) services, BIM Engineering Solutions, Laser Scan to BIM Services, BIM Clash Detection, 4D Construction Scheduling, Construction Management, Permit Expedition, and Architectural Services in Washington DC, Maryland, Virginia, Baltimore, New Jersey, New York, Philadelphia and Pennsylvania areas in the USA.